Skip to main content
Skip table of contents

Cameras

View live video from a camera on your system. If you are given the option, tap Low or High to change the resolution.

Configure the Set Point

On pan and tilt cameras, there is an option to set up to three set points. Once set up, these are quick ways to move the camera field of view to different areas around the room. Adjust the camera using the two bars on the side and bottom of the viewer window. When the camera is covering the area you would like, press and hold the Set Point icon below the viewer window to create the set point. When you tap the Set Point icon, the camera relocates to that exact set point.

Record Video Clips

Tap the Record icon to manually record a video clip.

View and Manage Clips

Select Clips to view a list of previously recorded video clips. Clips are ordered by date and time.

  • To rename the clip, select it and enter the new name.

  • To protect a clip from being overwritten, open it and select the Protect icon.

  • To download a clip, open it and select the Download icon.

View Recorded Clips on a Timeline (XV Gateway Only)

Video timeline lets you quickly scroll through recorded videos. You can adjust the timeline length to display recordings over different time periods from one hour to one month.

Alarm zone and detection region events are bookmarked on the timeline, allowing you to skip to those specific sections.

The timeline uses color coding to indicate different video statuses:

  • Red – No footage available

  • Grey – Default timeline for footage

  • Orange – Verified analytic detection regions or lines (animal, vehicle, or person)

  • Tan – Verified motion detection

To view the video timeline, complete the following steps:

  1. Go to Video.

  2. Select the camera you want to view the clips from.

  3. Select the image-20250407-131000.png Timeline icon.

  4. Scrub through the timeline to view recorded videos.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.